4 Highlights of Raymond Mill

Raymond mill, also known as Raymond roller mill and Raymond machine, is an essential equipment for non-metallic ore milling and processing in the powder industry. We adopt new structure technology and update and improve the design on the basis of traditional Raymond mill. It has high efficiency, low power consumption, small floor area and small one-time investment. Raymond Mill is widely applicable to limestone, potassium feldspar, bentonite, kaolin, cement Gypsum, glass and other non flammable and explosive mineral, chemical, construction and other industries with Mohs hardness not greater than 9.3 and humidity less than 6% are used for high-fine powder processing of more than 280 kinds of materials. The particle size of finished products can be adjusted arbitrarily within the range of 80-325 mesh, and some materials can reach 600 mesh.

During the operation of Raymond machine, the materials to be crushed are added into the machine from the feed hopper on the side of the machine cover. Relying on the grinding roller device suspended on the plum blossom frame of the main machine, it rotates around the vertical axis and rotates itself at the same time. Due to the centrifugal force during rotation, the grinding roller swings outward and presses tightly against the grinding ring, so that the shovel blade scoops up the materials and sends them between the grinding roller and the grinding ring, The purpose of crushing materials is achieved due to the rolling and rolling of the grinding roller.

4 Highlights of Raymond Mill

1. Convenient transportation and installation: the new structural design makes it occupy less space and more convenient for transportation, installation, operation and maintenance.

2. High efficiency and less pollution: Raymond mill adopts PLC electrical automation control, which can effectively reduce the failure rate and labor cost, achieve high yield, low noise and less pollution to the environment.

3. Fineness can be adjusted arbitrarily: the grinding fineness can be adjusted arbitrarily between 80-800 mesh, which makes the applicability more flexible and extensive.

4. Long replacement cycle of parts: the service life of grinding roller and grinding ring is long, which eliminates the disadvantage of short replacement cycle of vulnerable parts of centrifugal crusher.

The price of Raymond Mill usually ranges from tens of thousands to hundreds of thousands. Due to the different performance of different models of Raymond mill, the fineness of finished materials, motor power and output are also slightly different, so the equipment quotation is also different.